Support   
Contact Us   
Your Position: Home > Support

Electronic Potting Compound Operation Instructions

2017/8/15      view:

       Electronic potting compound is a kind of two components addition cure silicone rubber.

       Electronic potting compound  with the characteristics of heat-conducting.Here are some notes and operation instructions

as follow:
  1.The following material may hinder the curing of electronic potting silicone rubber,so please use after the test.When

necessary,please clean the application areas.
  a.Organotin compound or condensation silicone with organotin
  b.Sulphur,sulfide and sulfur rubber materials.
  c.Amine compounds as well as contains the amine materials.
  d.Pewters solder flux.
  2.Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
  3.Please note that the thickness of the silicone rubber affects the curing time.If the silicone rubber used is a little thick,then

the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature,we suggest

customers appropriately heat the mixture to accelerate vulcanization.
  4.Above electronic potting silicone rubber should be sealed storage.The mixture should be used up to avoid causing waste.
  5.Above silicone rubber belongs to non-dangerous goods,but keep away from mouth and eyes.
  6.When it gets stratified after a period of storage, please mix it evenly before using, which does not affect the performance.